官田鋼鐵股份有限公司

Products

Carbon Steel Wire*

Deformed Bar in Coil*

Spheroidized Wire*

Galvanized Wire*

All Thread Rod*

Screw*

Drywall

Chipboard

Home > About QSC

Carbon Steel Wire*

?Product Introduction

With the best quality billets we purchased from the most famous mills world wide, our hot rolled wire rod products are specialized in low carbon steel, high carbon steel, low alloy steel and free cutting steel, etc.

?Factory Information

Foundation :January 1995

Annual Capacity :400,000 Tons / Year

Numbers of Staff :250

Feature :About 236,000 Square Meters

Feature :

•Grinding equipment for surface quality improvement.

•Walking beam type of reheating furnace for uniformity.

•Two strands high speed rolling Coil weight up to 2 tons.

Billet conditioning facility is a key feature of this plant. All of our billet must go through the detecting and grinding process before being rolled into the wire rods for assuring the surface quality.

Brief History ：

1995：Quintain Plant Founded

1997：Commercial Run of Wire Rolling Mill Commercial Run of Billet Conditioning Line

1999：Accredited ISO-9002 Quality System Accredited CNLA Laboratory Certificate

2006：Accredited TAF Certificate of Deformed Bars in Coil"Chiai Industrial Co., Ltd." changed the name to "Quintain Steel Co., Ltd."

Address:

4F, NO.47, Xinjian Rd., South Dist.,Tainan City 70255, Taiwan

Tel. ： 886-6-2643888

Fax. ： 886-6-2647188

?Product Specification

WIRE RODS STEEL GRADE：

1.Low Carbon Steel Wire Rods（Rimmed Steel）

2.Carbon Steel Wire Rods（Aluminum Killed Steel / Silicon Killed Steel）

3.High Carbon Steel Wire Rods

4.Low Alloy Steel Wire Rods

5.Low Carbon Steel Wire Rods（Silicon Killed Steel）

6.Free Cutting Steel Wire Rods

7.Carbon Steels For Machine Structure Use

8.Steel Bars For Concrete Reinforcement ( In Coil )

Wire Rods Standard Diameter：

Ø5.5mm、 Ø6.5mm、 Ø7.0mm、 Ø8.0mm、 Ø9.0mm、 Ø10.0mm、 Ø11.0mm、 Ø12.0mm、 Ø13.0mm、 Ø14.0mm、 Ø15.0mm、 Ø16.0mm 。

Concrete Reinforcement ( In Coil ) Standard Diameter：#3 (D10) 、 #4 (D13)。

Download : Product Specification(PDF)

?Main Facilities

Factory	Facilities	quantities
Billet Conditioning Line	Shot Blast Device	1 set
	Line Magna	1 set
	Billet Grinding Machine	2 set
Wire Rolling Mill	Reheating Furnace	2 set
Wire Rolling Mill	Rolling stands ： Roughing-------- 8 stands Intermediate---- 10 stands Block Mill------ 10 stands	2 line


Billet Grinding Machine-SPOT, SKIN AND CORNER GRINDING	Line Magna-After the billet is magantized by Line Magna machine,the magnetic particles are accumulated on the defect’s area and have proper brightness under ultraviolet lights, the inspectors can inspect the existence of defects and make a mark on them.

Rolling stands-Roughing & Intermediate Stands Type：Horizontal ＆Vertical Block Mill Type： X-type No-twist Quantity：Roughing-------- 8 stands Intermediate---- 10 stands Block Mill------ 10 stands	Reheating Furnace- ●Walking Beam Type： ●Rolling Temperature ：over 1100 ℃

Shot Blast Device-Billets are charged on the V-roller table one by one. It is descaled by a shot blast. Descaling on the four surfaces of billet are madesimultaneously and continuously in progress.

Customer Service Provides satisfaction the service is we greatest achievement

Head Office	>Tel：06-2643888 Fax：06-2641789
Wire Rod Deformed Bar in Coil	>Tel：06-2925658 Fax：06-2925581 Fax：06-2925591
Spheroidized Wire	>Tel：06-2925698 Fax：06-2925581 Fax：06-2925591
Galvanized Wire	>Tel：06-2925661 Fax：06-2925581 Fax：06-2925591
Export department	>Tel：06-2646288 Fax：06-2647188

Carbon Steel Wire*

Deformed Bar in Coil*